SG-200
- Order number: 90078
- Product weight: 0.26 kg
This might also interest you
Use the modules in the SG series to can protect your router or a remote end device on your ITC... more
Product information "SG-200"
Use the modules in the SG series to can protect your router or a remote end device on your ITC infrastructure against power surges from the communications network. The SG-200 is the best choice for use on All-IP connections such as VDSL or ADSL without splitters.
Note: the SG-100 is designed for use on ADSL connections with splitters, ISDN or remote exchange line connections, remote analogue extensions, remote UP0 extensions or analogue door terminals.
Technical Highlights:
- Perfectly secured telecommunications infrastructure
- Plug and play – commissioning made as quick and easy as possible
- Full performance – bandwidths guaranteed
- No productivity hits when Internet access fails
Scope of delivery:
- Surge protection module
- RJ-45 connecting cable
- Mounting hardware
- Installation guideline
| PBX / ICT systems: | COMmander 6000(R/RX), COMMander Basic, COMmander Basic.2 (19"), COMmander Business (19"), COMpact 3000, COMpact 3000 ISDN/analog, COMpact 3000 VoIP, COMpact 4000, COMpact 5000, COMpact 5000(R), COMpact 5010 VoIP, COMpact 5020 VoIP, COMpact 5200(R), COMpact 5500R, COMtrexx Advanced, COMtrexx Business |
Usable in compliance with country-specific requirements: across europe Ambient temperature... mehr
- Usable in compliance with country-specific requirements: across europe
- Ambient temperature in operation | in storage: -5 to +40 ºC | -40 to +70 °C
- Relative humidity in operation: 5 % to 95 %, non-condensing
- Type of installation: wall mounting
- Protection class: IP20
- Casing material: plastic (fire-proof), black
- Dimensions (w x h x d): 142 mm x 81 mm x 27 mm
- Weight: 111 g
- Compliance: CE
- Surge arrester class: Type 2P1
- Rated voltage (UN): 20 V AC
- Highest continuous voltage (UC): 28 V AC / DC
- Rated current at 45 °C (IL): <=60 mA
- C2 rated discharge surge current 5 kV (8/20 μs) (In): 5 kA
- C2 rated discharge surge current 5 kV (8/20 μs) per core (In): <=2.5 kA (operation with
- wire terminal) / <=2 kA (operation via RJ45 socket)
- Protective level, core-core at C2 (UP): <=45 V
- Protective level, core-PG at C2 (UP): <=230 V
- Serial impedance per core (0 to 30 MHz): 3.8 Ω resistive ±20 %, +100 nF capacitive
- Cut-off frequency, core-core (100 Ω) (fG): 35 kHz to 80 MHz
- Capacity, core-core (C): <=15 pF
- Capacity, core-PG (C): <=10 pF
- Pulse reset time: <=160 ms
- Overload failure mode: Mode 3 (disconnect line)